DSRL Tool List

[2Evil4U]

Any thoughts about listing tools that we all may collectively have in case of emergency? Not necessarily to loan out, but just to know what's available in a pinch? Might be helpful for tech-day planning anyway.

Thoughts?

[king4456]

i have both kinds of screwdrivers, pliers and a shoplight with a broken light. also a single sided swingarm stand.

[mattc]

I've got a fancy fork oil level suction thingy if anyone needs to do forks.

http://www.motionpro.com/images/enlarged/08-0121.jpg

Front and rear sport bike stands, probably have more stuff too.


Also have a 1/2" drive battery impact (Snap On) that might be handy for emergency assistance.

[I_FLY_LOW]

I have the promotion chain tool set, plus a 30mm socket, for some of the larger stuff.. plus several other items...

[Klantz]

I've got a bunch of hand tools and a trailer with ramps to load pretty much anything into. At the studio I've got a ton of large equipment available and keys to get to any of it. Welders, metal brakes, hydraulic punches, torches, air tools... I use a floor jack or a correctly placed cinder block to jack the bike up.

[LAYNFRM]

i've got a set of honda dirtbike fork seal tools and fork seal driver. possibly works on other bikes. they're at lee's currently. don't really have a lot of specialty tools. kinda a channel locks and crescent wrench type of guy usually, lol. if i've got it, ya'll are free to borrow it.

[Ritten]

I've got a screwdriver.


....or possibly a chainsaw for bigger jobs!

[Timo]

Beer!!

[minig0d]

fork oil level tool, wheel balencer, wheel alignment tool (rhino axelign), all the larger metric size sockets (32,36mm etc), torque wrenches, etc...

this thread is kind of worthless... if you need a tool just ask :)

[dewnmoon]

Hammer, bigger, hammer errrrr
and a pipe and crescent wrench.......(general "harly tool kit")

Flux capacitor calibrator, Frammis pullers, farkle syncers and wurst removers as needed.

[2Evil4U]

Well, I was thinking we could generate a sticky list of potential oddball tools so members would be aware of what's out there. A lot of times I just buy stuff because I hate asking in the first place. Oh well.

I've got a VDSTS system, a bluetooth GS-911, a 2-barrel carbtune, R1X00 oil filter wrench, R1200 plug-wire removal tool, Marc Parnes wheel balancer with BMW 5-lug adapter, Jim VonBaden's R1200 DVD and about every regular, metric and torx tool imaginable including 1/2" and 3/8" drive torque wrenches.

[I_FLY_LOW]

geeze.. sounds like the parts needed to start an intergalactic battle!

[Klantz]

I forgot to say I've got a thingamajig, whirly do da, hooskerdos, and hooskerdonts with or without the scooterstick.

[Dirty_Sanchez]

I have almost a whole roll of duct tape and know how to use it.

I do have a little Lincoln MIG Welder for steel. I can't do aluminum though.

Grinders, Air Tools, Drill Press, Band Saw, my Dad's Ultimate Set of Tools and can fix most anything.

And a trailer set up for 2 or 3 bikes if anyone ever gets stuck somewhere with a dead bike.

Oh, yeah, I have more Loctite than you can shake a stick at, so if you need any, I have samples until the cows come home.

Dirty

[Dusty]

I can fix it.


<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/tKGCjS1zxgc&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/tKGCjS1zxgc&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>


my Dad's Ultimate Set of Tools and can fix most anything.